WLAN Handset 2210/2211/2212 Standby menu 83Warning TonesSelect Warning Tones to specify whether warning tones (such as system upor down, or out of range) play. Warning Tones are enabled by default.Display ContrastSelect Display Contrast to adjust the display for different lighting conditions.Keypad AutolockSelect Keypad Autolock to configure the keypad to lock automatically whenthe handset enters standby mode. You can disable the automatic lockingfunction (the default) or adjust the autolock for a 5, 10, or 20 second delaybefore locking.System InfoThe following sections describe the System Info menu options.Phone IP AddrSelect Phone IP Addr to view the IP address currently assigned to thehandset.Server IP AddrSelect Server IP Addr to view the IP address of the SVP Server and the OAIServer (if installed).Firmware VersionSelect Firmware Version to view the current firmware version of thehandset—the MAC address (the hardware identification number configuredat the factory) and the three files used by each version:• Downloader: pd11gl3.bin• Functional: pd11xxx3.bin• Phintl: phintl24.bin or pi11xxx.binExtensionSelect Extension to view the extension currently assigned to the handset.You cannot configure the extension with this option.Current Call SvrSelect Current Call Svr to view the current Call Server IP address and portnumber.Terminal TypeSelect Terminal Type to view the type of PBX in use.Nortel Communication Server 1000WLAN Handsets FundamentalsNN43001-505 01.04 StandardRelease 5.0 4 September 2007Copyright © 2007, Nortel Networks.