Nortel BCM 4.0 Upgrade Manual

Also see for BCM 4.0: Configuration Feature user guide Configuration guide User guide Manual

Nortel BCM 4.0 Upgrade Manual Manual pdf 31 page image

Chapter 4 Upgrading to BCM 4.0 and SRG 1.5 31Upgrade Guide9 Click Begin when you are ready to continue the upgrade.The Final Confirmation Before Upgrade Begins dialog box appears (see Figure 6).Figure 6 Final Confirmation Before Upgrade Begins10 Click Yes to continue the upgrade.11 The BCM Upgrade Wizard progress page appears (see Figure 7). As each action of theupgrade completes, the listing under Action and Status turns from blue to green, and a checkmark appears beside it. Note that the Update Bios line does not appear on upgrades toBCM1000 systems or any BCM 200/400 system that does not require the BIOS upgrade.There are also two BCM status indicators that monitor the progress of the upgrade (see“Upgrade Wizard BCM status indicators” on page 29).If there are problems with any step, a condition message appears that describes the problem(see Appendix A, “Troubleshooting,” on page 39).Note: The BCM system reboots several times during the upgrade process.Note: BCM 3.x has up to 500 AA lines, while BCM 4.0 has 492 AA lines. Afterupgrading, do not use lines 493 to 500.