Nortel BCM50 3.0 Installation And Maintenance Manual

Also see for BCM50: Configuration guide Installation and maintenance guide Keycode Installation Guide Integration guide Installation and configuration guide

Contents

Chapter 7 Installing the main unit 93Installation and Maintenance GuideTo install the power supply on the desktop1 Place the power supply next to the BCM50 unit on the desktop. The power supply must bewithin 1.5 m (5 feet) of the BCM50 unit and within 1.5 m (5 feet) of the AC power outlet (walloutlet or UPS).To install a power supply using the power supply mountingenclosure1 Slide the BCM50 power supplies into the power supply mounting enclosure.2 Mount the power supply mounting enclosure in the same manner as your other BCM50 units(in a rack, on a wall, or on a destop).For more detailed installation instructions for the power supply mounting enclosure, see the NortelBCM50 Power Supply Mounting Enclosure (N0118043).To install a power supply using the single power supplymounting bracket1 If you want to install one power supply only, use the single power supply mounting bracket.2 Attach the single power supply mounting bracket on the wall next to your BCM50 system.3 Snap the power supply into the power supply mounting bracket.For more detailed installation instructions for the power supply mounting bracket, see the NortelBCM50 Single Power Supply Mounting Bracket (N0130867).Next stepIf you install an expansion unit, proceed to Installing an expansion unit on page 95.Otherwise, proceed to Connecting the cables to the BCM50 system on page 103.