Nortel BayStack 100-S Reference

Also see for 400: Install guide Release note Using Setup Quick reference guide

Contents

Nortel BayStack 100-S Reference Manual pdf 21 page image

21Reference for the BayStack Instant Internet Remote Access Commands Version 7.11Chapter 1Using the Remote Administration utilityThis chapter explains how use Instant Internet’s remote administration utility toset up, view, or modify the unit configuration. There are two ways to use remoteadministration: out-of-band management and Telnet.Using out-of-band managementOut-of-band management is only available on the Instant Internet 100-S and400-S units. Out-of-band management provides an easy method to set up, view, ormodify a unit’s configuration either locally or remotely. Among many othersuggestions for use, this utility makes it easy for a company with multiple sites butonly one system administrator to set up each site without requiring that the systemadministrator to travel to the site.Using the Instant Internet Aux port, you can connect a PC directly to the InstantInternet or you can connect a modem to the Instant Internet and dial into thatmodem for out-of-band management. For detailed instructions on connecting tothe Aux port and setting up out-of-band management, refer to Setting Up theBayStack Instant Internet 100-S Unit, or Setting Up the BayStack Instant Internet400-S Unit. For information on entering the password, see “Providing thepassword” on page 23. For information on entering commands, see “Enteringcommands” on page 24.Enabling the Telnet service in Instant InternetThis section explains how to enable the Telnet service in Instant Internet, and howto access and use the remote host.