Nortel BayStack 100-S Reference

Also see for 400: Install guide Release note Using Setup Quick reference guide

Contents

Nortel BayStack 100-S Reference Manual pdf 53 page image

Chapter 2 Using configuration commands 53Reference for the BayStack Instant Internet Remote Access Commands Version 7.11Table 17 describes the pppoe command options.Use the ppp command to assign a user name and password to the PPP protocol.You can define more than one virtual pppoe interface for this command. Use theroute command to direct traffic over the proper pppoe interface.Exampleroute commandThe route command displays or changes settings for IP routes.Table 17 pppoe command optionsOption Definitionpppoe Specifies the name for the virtual pppoe interface.interface Specifies the name of the interface used for pppoe.demand Sets the demand timeout. The interface hangs up when theidletimeout expires. The idle timeout feature is optional.pppoe pppoe2 eth2ppp pppoe2 username " me@isp" password "password"route add default pppoe2route [add [/] [] [] []default [] [] []drop [/]default]