Applying Power to the CVX 6002-42 296-1011-202 Rel. 5.0, Doc. Rev. 02.01CVX 600 Hardware Installation GuideApplying Power to the CVX 600ProcedureTo apply power to the CVX 600, follow these steps:Step Action1 Ensure that you have connected all power cables to the appropriate terminals.2 Ensure that you have installed the clear protective cover over the power cableterminals.3 Ensure that you have inserted the flash memory card in PCMCIA slot 1 on theSCC (the upper SCC, if using master and redundant SCCs).4 Ensure that both switches on the circuit breakers (PDUs) are off.5 Apply power from the power source.6 Ensure that the red LEDs on both PDUs are on. If they are, turn the switcheson both circuit breakers (PDUs) on. If the LEDs are not on, check all powerconnections.Fans123456CVX 6ooBIPBIPYellow Red123456789101112PowerGoodFailedRedunPDU 2PDU 1ESDJackOIOICVX-0202BCircuit breaker (PDU) switchesModem/ISDNPwr GoodFailRedunModem/ISDNPwr GoodFailRedunModem/ISDNPwr GoodFailRedunDAC DS1x24PwrGoodFailRedunYEL REDYEL RED311011242122223211920181617151314978645SystemPwrGoodFailRedun10/100 Enet321HSSIRESETPCMCIA1 2SystemPwrGoodFailRedun10/100 Enet321HSSIRESETPCMCIA1 2
