Nortel Contivity 2600 Install Manual

Also see for BayStack 600 Series: User guide Installation hardware Installation Reference guide Release note

Contents

Nortel Contivity 2600 Install Manual Manual pdf 50 page image

50 Chapter 3 Nortel VPN Router 1700 and 1600 option installationNN46110-317 02.01Shutting down the system to add or replace hardwareTo install or replace an option card or a DIMM, you must first shut down the VPNRouter 1700 or VPN Router 1600 and unplug it.To shut down the VPN Router 1600 or 1700:1 Use the Web graphical user interface (GUI), or the command line interface(CLI) to shut down the gateway.• Web GUI: Choose Admin > Shutdown. Select the option to power off thegateway after shutdown.• CLI: Use the reload command to shut down the system. For example,enter reload power-off disable-logins “Upgrade hardware”For the complete syntax of the reload command, see the Nortel VPNRouter Using the Command Line Interface (NN46110-507).2 Wait for the system to shut down.3 Disconnect the power cord from the power outlet.4 Disconnect the cord from the VPN Router 1700 or 1600.The power receptacle is on the rear of the gateway.Caution: Risk of equipment damage or data lossShut down the gateway as described in this section before you attempt toadd or replace an option card or DIMM.