Nortel Meridian Meridian 1 Implementation Manual

Also see for 1000 Con?guration guide: Brochure Reference User manual Overview User guide

Contents

Page 192 of 208553-3001-358 Standard 1.00 October 2003Procedure 36Stand-alone card to primary card1 Access the MICB Installation Wizard: Step 1 – Basic Card Settings window(see “Step 1 – Basic Card Settings” on page 69). In the “Type” field, select theradio button “Dual Card – Primary.”2 Click the Submit & Continue button.If 10 DN pairs are configured, the system deletes one automatically. TheMICB first attempts to delete a DN pair that has no conferences scheduledagainst it. If no such DN pair is found, the MICB deletes the DN pair with theleast number of conferences using it. All associated conferences are deleted.Note: A DN pair used by a permanent conference is not deleted.If a DN pair is deleted in direct-access dialing mode, a pop-up messageappears. Note the deleted DN pair, as it can be removed from the switchconfiguration.3 The system displays Step 2 of the Installation Wizard (see “Step 2 – AccessNumbers” on page 72). If the automatic change, as described above, tookplace, this is reflected in the DN table. If the direct access dialing mode isused, only nine DNs appear.4 Click the Submit & Continue button.5 The system displays Step 4 of the Installation Wizard (see “Step 4 – DualCard Meetings” on page 73).If a DN pair was automatically deleted as described above, it appears in thefields “Conference access number” and “Chairperson number in primarycard.” You can change these numbers; they must be configured in the switchas well.Fill in all the fields as described in the installation instructions, and click theFinish button.6 Logout of this card and proceed with the switch configuration change (seeThis procedure is now completeProcedure 37 ).Procedure 37Switch configuration changes1 If a DN pair was deleted from the secondary or primary card, delete it fromthe switch datafill.2 Configure the DNs defined in the Installation Wizard Step 4 window of theprimary MICB. Define them as described in the dual-card MICB installationinstructions (for the Succession 1000M, Succession 1000, and Meridian 1,see “Configure DNs for a dual-card conference” on page 48; for the MeridianThis procedure is now completeSL-100, see “Dual-card configuration” on page 56).