Nortel Meridian Meridian 1 Implementation Manual

Also see for 1000 Con?guration guide: Brochure Reference User manual Overview User guide

Contents

Page 51 of 208Meridian Integrated Conference Bridge Service Implementation GuideNote: Because of the number and variety of DNs programmed forthe dual-card setup, Nortel Networks recommends creating a dialingplan chart similar to Table 10 on page 50. Refer to this chart whenconfiguring the primary and secondary card attributes, including thedual-card settings, in the administration BUI.Finally, configure each port on the primary and secondary cards as adigital set. See Table 8 on page 45.Meridian SL-100 configurationSingle-card configurationAfter installing the MICB card(s) and connecting the terminal for CLIaccess and the server for BUI access, perform Meridian SL-100database configuration. Figure 11 shows the tables to datafill forsingle-card setup.Note: If single-number access is being used, the DN pairs are notrequired. Instead configure a single-number access DN.Figure 11Single-card conference, 10 conferences, 32 portsG100016MICB CardTable DNROUTEMICB997-1400Table OFRT601 997-1400Table DNROUTEMICB997-1400 (Main ACD DN to route to ACD agents)997-1601 to 997-1610 (setup for up to 10 MICB conferences)997-1701 to 997-1910 (setup for up to 10 MICB chairpersons)997-1800 (setup for single access MICB conference call)997-1900 (setup for single access MICB conference call)32 ACDagentsassigned toMICBACDGRP