44 Chapter 2 Installing the 8010, 8006, and 8003 chassis316314-E Rev 011 Hold each rack-mounting bracket against one side of the chassis. Make surethat the attachment holes in the bracket match the holes in the chassis(Figure 8, Figure 9, and Figure 10 on page 45).Figure 8 Positioning the rack-mounting brackets: 8010 chassisFigure 9 Positioning the rack-mounting brackets: 8006 chassisNote: Each bracket fits only one side of the chassis. The brackets arelabeled R (right) and L (left). If the mounting holes do not line upbetween a bracket and the chassis, try that bracket on the other side ofthe chassis.11151FA