54 Chapter 3 Installing the 8010co chassis316314-E Rev 01Shipment contentsInspect all items for shipping damage. If you detect any damage, do not install the8010co chassis. Call the Nortel Networks Technical Solutions Center in your area(see “How to get help” on page 21).In addition to the 8010co chassis, your shipping container contains severalhardware accessories. Verify that the items in the shipping container match thoseon the shipment packing list.Use Table 8 as a checklist when verifying the contents of the shipping container.Table 8 8010co chassis shipping accessoriesCheck Accessory Use toAntistatic wrist strap Direct the discharge of static electricity from your body tothe chassis, thereby avoiding discharge to, and possibledamage of, sensitive electronic components.• One cable adapter• One 10-foot console serial cableConnect an optional management console.Screws and hardware:• 12 Phillips head screws• 12 self tapping hex head screws• 12 clipnutsNOTE: The hardware required for mounting the chassis in arack depends on your rack type.Mount the chassis to a rack rail.Mount the chassis to a Hendry rack.Use the clipnuts if necessary.• 4 Phillips head screws• 4 hex nuts• 4 self tapping hex head screwsNOTE: The hardware required for mounting the installationshelf in a rack depends on your rack type.Mount the installation shelf to a rack rail.Mount the installation shelf to a rack rail.Mount the installation shelf to a Hendry rack.• 4 pan head screws Install the cable management bracket.Installation shelf Eases mounting the 8010co chassis in an equipment rack.1 upper cable management bracket Manage network interface cables.2 side cable management brackets Manage network interface cables.Bottom bezel Cover the power supplies and separate the chassis airintake from the power supply air intake.
