Chapter 3 Installing the 8010co chassis 59Installing and Maintaining the Passport 8000 Series ChassisMounting the 8010co chassis in a two-post rackTo mount the 8010co chassis in a two-post rack, you need the followingequipment:• Installation shelf (shipped with the 8010co chassis)• A standard 19-inch or 23-inch equipment rackAttach the clipnuts shipped with the 8010co chassis if necessary.The hardware required for mounting the chassis in a rack depends on your racktype. Use the 12 Phillips screws and a Phillips screwdriver to intall the chassis in astandard rack. Use the 12 hex head screws and a nutdriver to install the chassis ina Hendry rack.In a 7-foot two-post rack, you can install two 8010co chassis platforms and a BIP.Figure 29 on page 60 shows two 8010co chassis with a BIP installed in a two-postrack.Note: To install the 8010co chassis in a 23-inch equipment rack refer tothe rack manufacturer’s 19-to-23-inch adapter installation instructions.
