Nortel T7406 Installation Manual

Contents

Installing the Base Station / 21T7406 Installation GuideInstalling the Base StationThis section describes the base station and:• how to mount the base station on a wall• what programming is required before you connect the base station toyour system• how to connect the base station to your systemThe T7406 cordless telephone operates on the same principle as a two-way radio. Therefore, the location of the base station affects the rangeof reception. The base station should not be installed where radio wavesare blocked or reflected, such as next to a filing cabinet.For optimal performance, install the base station at least 2.4 meters(eight feet) above the floor and at least 3.2 meters (ten and one halffeet) apart from a second base station. Always position the antenna at a90° angle to the base station.Base Station FeaturesThis section illustrates the base station for the T7406 system.AntennaNote: When power is connected to the base station, the LED on thefront of the unit starts flashing. During operation the LED flashesevery second to indicate that the unit is receiving power.Baseantenna(90° to basestation) LED indicates basestation has power