Nortel T7406 Installation Manual

Contents

Handset Configuration / 31T7406 Installation Guide• If you want to change the number, follow these steps:a. Press CHANGE.The display shows Enter Password. (six digits)b. Enter the default password (000000).c. Press OK to accept the code.The display shows Press Digit 1 - 3. The currentHandset ID # is displayed on the bottom left of theLCD.d. Press the digit that you want to assign to this handset.e. Press OK.The display shows 6. Handset ID.Changing the Handset ID PasswordAfter you enter the handset ID, if you want to change the password forthe ID access, follow these steps:1. Press NEXT until the display shows 7. Chg Password.Note: This password is used to access the Handset ID option. Ifyou decide not to change the password, press the Optionbutton to exit the menu.2. Press SHOW.The display shows Enter old PWD.3. Enter the default six-digit password (000000) or the last passwordyou entered.4. Press OK.The display shows Enter New PWD.5. Enter a new six-digit password.Note: For ease of administration, it is recommended that you usethe same password as the one you used for the Securitycode/S.S. Code.