Nortel T7406 Installation Manual

Contents

Charging the T7406 Battery Pack / 25T7406 Installation GuideFirst-time ChargingWhen you first setup your new handset, follow these steps to charge thebattery and install it into the handset:1. Charge the battery pack in the back battery port of the charger fora minimum of 30 minutes.2. Install the battery pack in the handset.3. Charge the battery pack in the handset for a minimum of threehours.4. Trickle charge a spare battery pack in the back battery port of thecharger for 12 hours.The following diagrams demonstrate where the battery pack fits onto ahandset, and how to trickle charge the spare battery pack.Installing a Battery Pack into the Handset1. Position the battery pack in thebottom position on the back of thehandset.2. Snap the top of the battery pack intoplace.Charging the Handset1. Slide the handset into the charger.Make sure the handset and chargercontacts touch.2. The handset charge indicator lightturns on. The battery pack indicatorlight is red while it is charging.The battery pack fully charges inapproximately three hours. Whenthe battery pack is fully charged, theindicator light turns green.Note: Charging begins as soon asthe handset is placed in the basestation.3. Slide the spare battery pack into theback battery port. Make sure thebattery pack and charger contactstouch.BatterypackNote: If youare using aleather cover,it must beremovedbefore youput yourhandset incharger.Indicator lights