3-6 Getting started555-9001-316 Standard 1.0 February 1996initial-templateThe initial-template entry identifies an initial-action template (without the.act file extension) for setting the startup action for the specified sessionswhen connecting to the host computer. The start-up action brings thespecified sessions to the screen on the host computer where the actiontemplates start when processing requests. Figure 3-4 shows the flow of asample initial-action template.Figure 3-4Initial-action templateThe initial-action template follows the same format described earlier foraction templates. The screen templates specified by the initial-action templatemust also be created. The screen template for a login screen (or the loginprompt) must specify the correct login ID and password (if appropriate) toaccess the host computer. You should not specify a reset-action template inthe initial-action template, although you should specify a logout-actiontemplate.LoginScreenApplicationMenuScreenApplicationMenuScreenAccountNumberScreenCustomerInformationScreenThe initial-action template bringsthe host computer application to theApplication Menu screen, leaving thesession at the point the actiontemplate starts.Initial-action Template Action Template
