Nortel m3900 series User Manual

Also see for m3900 series: Reference guide Reference guide Installation guide Installation and administration guide Description, Installation and Operation

Contents

Nortel m3900 series User Manual Manual pdf 19 page image

Password reset 19The GLISTEN feature is only available when enabled, and when assignedto the set through SERVORD. When this feature is not available, it doesnot show up in the options menu lists. In addition, because handsfreeand group listening cannot be in activation at the same time, the grouplistening enable feature is not in the options list if there is an active callwith handsfree enabled.In order to use the GLISTEN feature, the user must first enable the featureby using the Options mode. When the feature is enabled, the handsfreekey can turn the speaker on or off. To turn off the speaker, the user mustpress the Handsfree key a second time. The speaker only turns on if thehandset is off-hook. The speaker automatically turns off when the handsetis placed on-hook.To activate handsfree when group listening is in use, the user must pressand hold the Handsfree key, place the handset on-hook, and release thehandsfree key. Alternately, the user can place the call on hold by pressingthe Hold key, place the handset on-hook, followed by pressing the DN keythat has the held call.You must enable handsfree for group listening to be enabled.InteractionsGLISTEN is assignable to M3902, M3903, and M3904 sets usingSERVORD commands NEW, NEWACD, ADD, and EST. Use theSERVORD CHF command to toggle the status of the option to an existingset previously listed. When you provision the options through SERVORD,the user can access the GLISTEN feature with the options key.Data schemaTable IVDINV has set refinements added with GLISTEN as a boolean field.Refer to Nortel Communication Server 2100 Configuration — CommercialSystems Data Schema Reference, NN42100-504 for more information.Password resetThe M3903, M3904, and M3905 sets provide password reset capability todirectories that can be password protected.The M3903 set uses password reset for the call log/redial fixed featurekey. The call log/redial key allows access to the call log and the RedialList.The M3904 set uses password reset for the directory/log fixed feature key.The directory/log key allows access to set-based applications, such aspersonal directory, call log, and Redial List.Nortel Communication Server 2100M3900 Series Meridian Digital Telephones User GuideNN42200-110 09.01 Standard20 August 2008Copyright © 2008 Nortel Networks.