Notifier AFP-100 Instruction Manual

Contents

Notifier AFP-100 Instruction Manual Manual pdf 92 page image

Appendix D: NFPA Standard-Specific Requirements Remote Station Protective Signaling System92 AFP-100/AFP-100E Instruction PN 51010:C1 02/06/2002Remote Station Protective Signaling SystemGeneral Notes:1. Cut Jumper JP4 on the AFP-100 main circuit board to supervise placement of the RTM-8F module.2. Jumper JP1 must be cut for polarity reversal Remote Station operation.3. Jumper JP2 must be in position ALARM/TROUBLE REVERSE POLARITY for use in alarmand trouble transmission or ALARM ONLY for alarm transmission only.4. For information on UL Power-limited wiring requirements see "UL Power-limited WiringRequirements" on page 34 .Figure 29 NFPA 72 Remote Station Protective Signaling System21214321212121212121CNCNOCNCNOCNCNOCNCNOCNCNOCNCNOCNCNOCNCNOFireïLite RS-82 Receiving Station (UL listed).Refer to RS82 Remote Station Receiver Manual.+ñ Polarity Shown isNormal StandbyRTM-8F(not suitable for transmissionof separate alarm and troublesignals to Remote Station)JP1JP2Power-limitedAFP1rs82.cdrñ+Technical Manuals Online! - http://www.tech-man.com