AFP-3030 Operations Manual — P/N DOC-01-033:C 05/12/2018 57How Releasing Zones Operate Releasing ZonesB.2 How Releasing Zones OperateThe figure below contains an illustrated example of how Releasing Zones work, using cross zone selections with four detectors and anNAC mapped to Releasing Zone 1 (listed as ZR01 in the zone map). Table B.3 on page 57 lists the cross zone selections and the condi-tions that activate the Releasing Zone:Figure B.1 Illustrated Example of Cross Zone ProgrammingListing of each Cross Zone option and the conditions required to activate the Releasing Zone, according to the example shown inFigure B.1 on page 57.Cross Zone Selection(Cross=) Condition(s) Required to Activate the Releasing zoneCross=NONE An alarm from any detector or module activates the releasing circuit.Cross=YES An alarm from any two detectors or modules activates the releasing circuit.Cross=ZONE An alarm from two detectors or modules mapped to different Software Zones, but mapped to thesame Releasing Zone.• An alarm from L02D101 and L02D103 – detectors mapped to different zones, but both list ZR01 in theirzone map.• An alarm from L02D102 and L02D104 – detectors mapped to different zones, but both list ZR01 in theirzone map.• An alarm from L02D101 and L02D104 – detectors mapped to different zones, but both list ZR01 in theirzone map.• An alarm from L02D102 and L02D103 – detectors mapped to different zones, but both list ZR01 in theirzone map.Cross=HEAT Activation of heat detector L02D104 and one smoke detector (L02D101, L02D102, or L02D103).Table B.3 Example of Cross Zone SelectionsReleasingZone ZR01GeneralZone Z002GeneralZone Z001SmokeDetectorL02D101SmokeDetectorL02D103HeatDetectorL02D104SmokeDetectorL02D102SLCNACZone map = Z002 ZR1Zone map = Z001 ZR01Zone map = Z001 ZR01INPUTS ZONE MAPL02D101 Smoke Detector Z001, ZR01L02D102 Smoke Detector Z001, ZR01L02D103 Smoke Detector Z002, ZR01L02D104 Heat Detector Z002, ZR01OUTPUTSLC Module Releasing Circuit ZR01Table B.2