Novra S300 User Manual

Also see for S300: User manual Setup guide User manual

Novra S300 User Manual Manual pdf 26 page image

Version: 1.00 Confidential and Proprietary 26 of 498. + Nulls: Selecting this checkbox will pass the full transport stream including null packets to theLAN. . The transport stream will be passed to the multicast destination IP address/port that isentered in the field just below the Pass All checkbox4.2.2 IP Re-Mapping ButtonThis section discusses how to configure the IP Re-Mapping feature within the S300.The IP Remapping feature in the S300 will enable the operator to re-map a multicast IP addresses or multiplemulticast IP addresses that have been received by the receiver to a different destination multicast IP address.The IP mapping table will support up to 16 entries and will therefore allow for 16 multicast addresses to beremapped. Some of the features of the IP mapping table include: Ability to map single multicast IP address to a destination multicast IP address Ability to map multiple multicast IP addresses to a single destination multicast IP address, Ability to use a subnet mask to map a range of multicast IP address to a single destination multicastIP, Ability to turn the multicast mapping table on or off without losing the table contents, Ability to turn a single multicast mapping table entry off (No Rule) without losing the entry from thetable, Ability to use IGMP filtering to enable (or disable) sending of mapped multicast packets, and Ability to forward mapped multicast IP packets regardless IGMP filter settingThe IP mapping table can only be assessed from the main screen by selecting the IP Remap button.This will bring up the IP re-mapping table as shown below.