Novra S300 User Manual

Also see for S300: User manual Setup guide User manual

Novra S300 User Manual Manual pdf 36 page image

Version: 1.00 Confidential and Proprietary 36 of 49NOTE: It is important to note that if a program is to be removed from the S300,that the individual PIDs, program number and multicast IP address must bemanually removed from these lists.4.7 Video Wizard Drop DownThe A/V Data button group is only available on the S300-Pro and S300CA models. If these buttons aregrayed out, then this feature is not available on your receiver.The Video Wizard is designed to assist the operator in setting up audio/video programs for viewing. Whenthe Video Wizard screen is filled out, the required MPEG PIDs needed to view a program (video, audio, PMT,and PAT) may be grouped together and assigned to a multicast IP address and port. Once submitted, thePID’s and IP address will be used to populate the following receiver lists: Video Content List (PIDs and Multicast Address) PAT List (Program # and PMT PID) CAM program List (Program Number, if scrambled is selected)The Video Wizard Screen below shows a typical configuration of a scrambled program (Program 1).Figure 18 –Video Wizard Drop Down (Scrambled Program)1. Prog #: Use this edit box to add the desired program number. This value will be used to helpcreate a mini-PAT (see Section 4.3.2).