Novra S300 User Manual

Also see for S300: User manual Setup guide User manual

Novra S300 User Manual Manual pdf 31 page image

Version: 1.00 Confidential and Proprietary 31 of 49NOTE: - The keyboard may be used to add and remove PIDs. Also, right clickon a list entry to edit or delete the PID list.specified in Add Destination - IP.c. ADD: This button adds the content of the IP address and port boxes to the appropriatePID in the PID List.d. Delete: This button deletes the selected IP address and port number from theappropriate PID in the PID list.e. Delete All Destinations: This button will empty the IP destinations in the PID list.5. Apply: By pressing this button, PID and destination changes are sent to the receiver.6. Exit: Exits back to the main screen4.3.2 Program Association Table (PAT) ButtonIf your S300 receiver is the Pro mode or CA model, then it has the ability generate a mini ProgramAssociation Table (PAT) for each program. The mini-PATs may be configured by selecting the PAT button.This brings up the Program Association Table screen (see below).Figure 13 - Program Association Table Screen