NVIDIA Corporation 105Chapter 7Configuring Key ForceWare Graphics Driver Features6 Click OK to return to the previous page. The Application profiles list displays thenew profile name, as shown in the image on the right in Figure 7.7.7 For each driver setting you want to change for this new profile, follow these steps:a Select the check box of the driver setting you want to change and save as part ofthe new profile.b Click Apply.c If needed, clear the Application controlled check box and click Apply.d Use the slider to set the value you want and click Apply.For additional information on specific driver settings, see “Basic DriverSettings” on page 106 or “Advanced Driver Settings” on page 109.e Click Apply.Adding Profiles With an SLI ConfigurationIf you are an advanced user running an SLI multi‐GPU configuration and want tocreate profiles that utilize SLI rendering technology, see “SLI Rendering Mode” onpage 115 and “About Using Other SLI‐based Advanced Settings” on page 115.Deleting Application ProfilesYou can remove the following types of profiles — i.e., the Remove button is availablefor use when:• From the Active profile list, you have selected a profile you have added.• From the Active profile list, you have selected an existing pre‐defined profile thatyou have modified and then renamed.Note: Remember that when you delete a profile that is associated with a singleapplication or multiple applications, all NVIDIA settings for that one ormultiple applications as you’ve set in that profile are remove. dIf you have created another profile that contains any of these same applications,you may want to use that profile.
