NVIDIA Corporation 65Chapter 5Configuring Displays• Fixed Aspect Ratio Timing forces the displayed image to retain the aspect ratio ofthe mode rather than aspect ratio of the analog displayNote: The driver may place a black border around the displayed image, as needed.• Enable doublescan for lower resolution modes. Enabling this setting greatlyimproves image quality at lower resolutions, which is most useful for full screenvideo or computer games.Adjusting Digital Display SettingsIf your NVIDIA GPU‐based graphics card is connected to a digital display, followthe steps in this section to access the display’s Device Adjustment page where youcan configure some flat panel display settings.If you have only one display connected and you do not the see the “nView Display Settings”option on the NVIDIA display menu, you will see the “Screen Adjustment” optioninstead.1 Click Screen Adjustment to access the digital flat panel settings page (Figure5.3).2 See the next section Digital Display Settings for configuration details.If you have more than one display connected, follow these steps.1 Click nView Display Settings from the NVIDIA display menu.2 Select the display image that represents your digital display and then right clickand select Device Adjustments to open digital flat panel settings page (Figure5.3).3 See the next section Digital Display Settings for configuration details.Digital Display SettingsThe digital display options are shown in Figure 5.3 and explained below.• Display Adapter Scaling. Select this setting if you want lower‐resolution imagesscaled to fit the flat panel. For example, if your flat panel has a maximumresolution of 1400x1050, an image with a resolution of 1024x768 will be scaled toappear on the screen at a 1400x1050 resolution.• Centered Output. Select this setting if you want to display lower‐resolutionimages as is in the center of the flat panel. For example, if your flat panel has a
