56 Quadro Workstation User’s GuideChapter 4Using nView Multi-Display Settingsthe secondary display when its resolution is set to less than the value set on theprimary display.ProcedureFollow these steps to enable Virtual Desktop:1 From your Windows desktop, right click to view the Windows desktop menu,then click Properties > Settings > Advanced and then the NVIDIA GPU tab.2 From the NVIDIA menu, click the nView Display Settings option.3 From the nView Modes list, select Clone and click Apply.Note: If you just switched to Clone from Dualview, you’ll need to follow theprompts to restart your computer. Then, when you have returned to yourdesktop, go to the nView Display Settings page and select Clone from thenView Modes list and click Apply.From the nView Display Settings page, right click display image (i.e., 1a or 1b) todisplay the pop-up menu and click Change Resolution (Figure 4.16). The ScreenResolution & Refresh Rates page appears, as shown in Figure 4.17.Figure 4.16 nView Clone Mode with Virtual Desktop Enabled — Disabling PanningClick Change Resolutionfrom the context menuof your secondary display.
