70 Quadro Workstation User’s GuideChapter 5Configuring DisplaysVideo Output FormatClick the Video output format connection list to specify the type of video connector,based on the output signal format supported by your regular television or HDTV, ifyou have one connected. For details on configuring an HDTV, see Chapter 6 —“Configuring HDTV” on page 75.The default setting is Auto-select (Figure 5.4).If you have the proper connector cable, S-Video Out generally provides a higherquality output than Composite Video Out.If you are not sure about the type of video connector you should specify, chooseAuto-select.Device Adjustments — TV OutputYou can customize your TV display settings from the TV Output page shown inFigure 5.5.Note: Availability of settings on your TV Output page can vary from those shown inFigure 5.5 and depend on the “Internal” TV encoder on your NVIDIA GPU orthe “external” TV encoder on the NVIDIA GPU-based graphics card you areusing.Screen PositioningRepositioning the TV screen — To reposition the TV screen (desktop), click any ofthe long arrow buttons displayed on the outer top, bottom, left, and right edges of theTV display icon, as shown in the TV Output page in Figure 5.5.Note: If the TV picture becomes scrambled or is blank due to over-adjustment,simply wait 10 seconds; the picture will automatically return to its defaultposition. You can then begin your adjustments again. Once you havepositioned the desktop where you want it, click OK or Apply to save thesettings before the 10 second interval has elapsed.
