OHAUS Defender 5000 Series Instruction Manual

Also see for 5000: Instruction manual Operator's manual Quick start guide Quick start guide User guide

OHAUS Defender 5000 Series Instruction Manual Manual pdf 23 page image

Defender 5000 Indicators EN-213.4 Setup MenuWhen the Indicator connects to a scale base for the first time, enter this menu to set the CapacityUnit, Range, Capacity and Graduation. Default settings are bold.Setup OptionsCapacity Unit g, kg, t (Metric Tonne), lb, ton (Short Ton)Range Single Interval, Dual Interval>|1|< Capacity 1-999999>|1|< Graduation 0.0001~100>|2|< Capacity 1-999999>|2|< Graduation 0.0001~100LanguageEnglish, French, German, Italian, Spanish,Chinese, Japanese, Korean, Russian,PolishPower On Zero Off, OnPower On Unit Auto, kg, lb, g, oz, lb:oz, t (Metric Tonne),ton (Short Ton), cKey Beep Off, OnBeep Volume Low, HighTransaction Counter Off, OnNext Transaction 1-9999999Password Off, OnSet Password xxxxxxConfirm Password xxxxxxReset3.4.1 Capacity UnitSelect the unit used for calibration.Kgt (Metric Tonne)lbton (Short Ton)g3.4.2 RangeSet the number of weighing intervals in the weighing intervalThe TD52 terminals can be configured to use single or dual interval. Each interval can be assignedits own graduation. If dual interval is selected, the graduation will change when the weight reachesthe second interval.When Single interval is selected, the additional parameters available are: >|1|< Capacity >|1|< GraduationWhen Dual interval is selected, the terminal functions with two intervals, each with its own capacityand graduation. In addition to the Interval 1 capacity and graduation parameters, the following twoparameters are available: >|2|< Capacity >|2|< Graduation