Specifying settings from the control panel 4CS230 (Phase3) 4-151v3 settingThe settings that can be specified are described below.SNMP v3 Setting screen 1/3SNMP v3 Read Setting screen 2/3SNMP v3 Write Setting screen 3/3Item DescriptionContext Name Specify the context name. Use the keyboard that appearsin the touch panel to type in the context name (up to 63characters).Discovery User Select whether to enable the Discovery User setting.Discovery User Name Specify the discovery user name. Use the keyboard thatappears in the touch panel to type in the discovery username (up to 32 characters).Item DescriptionRead User Name Specify the read user name. Use the keyboard that appearsin the touch panel to type in the read user name (up to 32characters).Security Level Select the authentication security level.Read User Password Specify the authentication password. Use the keyboardthat appears in the touch panel to enter each password forthe security level (up to 32 characters).If "auth-password" is selected, enter the password only inauth-password.If "priv-password" is selected, enter both passwords.Item DescriptionWrite User Name Specify the write user name. Use the keyboard that ap-pears in the touch panel to type in the write user name (upto 32 characters).Security Level Select the authentication security level.Write User Password Specify the authentication password. Use the keyboardthat appears in the touch panel to enter each password forthe security level (up to 32 characters).If "auth-password" is selected, enter the password only inauth-password.If "priv-password" is selected, enter both passwords.
