4 Specifying settings from the control panel4-158 CS230 (Phase3)4.34 OpenAPI settingsSpecify whether or not the interface is open to software with a function forcommunicating with the copier. The settings for "Access Setting", "PortNo.", "SSL", and "Authentication" of OpenAPI can be changed.Access settingSets whether to permit access from other systems that use OpenAPI.(Default setting: Allow)1 In the Administrator Setting screen, touch [System Connection]. (Referto page 4-10 for more details.)2 In the System Connection screen, touch [1 OpenAPI Setting].3 In the OpenAPI Setting screen, touch [Access Setting].Buttons for selecting settings appear.4 Touch the desired selection key.– To permit access using OpenAPI, touch [Allow].– To prohibit access using OpenAPI, touch [Restrict].Access using OpenAPI is set to be permitted or prohibited.
