Specifying settings Using Web Connection 5CS230 (Phase3) 5-1375.33 TCP socket settingYou can specify TCP socket settings.The settings that can be specified are described below.2 ReminderWhen changing the TCP socket settings, be sure to turn the power of thismachine off, then on again.When turning the main power switch to "OFF", then to "ON", wait 10seconds or more before turning the switch to "ON" again; otherwise, thismachine may not function normally.Item DescriptionTCP Socket Specify whether to use a TCP socket.Port No. Enter the port number (input range: 1 to 65535).Use SSL/TLS Select to use SSL/TLS.Port No. (SSL/TLS) Enter the port number for SSL/TLS (input range: 1 to 65535).TCP Socket (ASCII Mode) Specify whether to use a TCP socket in the ASCII mode.Port No. (ASCII Mode) Enter the port number (input range: 1 to 65535).