VL3622c/VL2822c/VL2222c 14-514.2 Cannot configure the settings/Cannot print according to the settings 1414.2 Cannot configure the settings/Cannot print according to the set-tingsCheck the following items when you cannot configure settings of the printer driver or cannot print accordingto the settings you have configured.Reference- Some items for the printer driver may not be configured simultaneously.14.2.1 The printer driver settings have no effectProblem Possible Cause RemedyCannot select items in the print-er driver.Some functions cannot be com-bined.Grayed out items cannot be con-figured.A "conflict" message saying"unable to configure" or "func-tion will be canceled" appears.You are trying to configure thefunctions that cannot be com-bined.Check carefully the functions youhave specified, and then specifythe functions that can be com-bined.Cannot print according to thesettings you have configured.The settings may not be config-ured correctly.Check the setting of each item ofthe printer driver.The selected functions can becombined in the printer driver,but may not be combined in thismachine.The paper size or paper orienta-tion specified in the applicationmay take precedence over thesettings in the printer driverwhen printing.Configure settings in the applica-tion correctly.The watermark cannot be print-ed.The watermark settings may notbe configured correctly.Check the watermark settings.The density of the watermarkmay be too light.Check the density setting.Some graphic applications donot print watermarks.When using such a program, thewatermark cannot be printed.The staple function cannot bespecified.The staple function cannot beused if the Paper Type is set toThick or Transparency.Check the setting of each item ofthe printer driver.The staple function requires theoptional Finisher FS-527 orFinisher FS-529.Install the required options andenable them on the printer driver.Cannot staple. When printing a large number ofpages, stapling cannot be per-formed.Change the number of pages tobe printed.If the document contains pagesof different sizes, stapling can-not be performed.Check the document.The stapling position is not asexpected.The orientation setting is notcorrect.Check the stapling position in theprinter driver settings.Cannot specify the punch func-tion.The hole punching cannot bespecified when Booklet, Trans-parency, Thick 2, Thick 3, or En-velope is selected as the papertype.Check the setting of each item ofthe printer driver.The optional Finisher FS-527and Punch Kit are required.Install the required options andenable them on the printer driver.
