Windows NT 4.044-22 VL3622c/VL2822c/VL2222c4.412 Remove the DVD-ROM from the DVD-ROM drive.This completes the printer driver installation.4.4 Windows NT 4.04.4.1 For network connection (LPR)To use LPR printing, specify the port while installing the printer driver.Settings for the machineTo use LPR printing, you must configure the network settings for the machine in advance.d ReferenceFor details on the network settings for the machine, refer to the [User's Guide Network Administrator].Installing the printer driver manually using the Add Printer Wizard0 Installing the driver to Windows NT 4.0-based computers requires the administrator authority.0 In Windows NT4.0, to use the LPR port, you must have the [Microsoft TCP/IP Printing] service installedin your computer.1 Insert the printer driver DVD-ROM for Windows into the DVD-ROM drive of the computer.2 Click [Start], and then select [Settings] - [Printers].3 Double-click the [Add Printer] icon.[Add Printer Wizard] starts.4 On the page for specifying how the printer is attached, select [This computer].5 Click [Next >].A page for selecting a port appears.6 Click [Add Port...].7 From the [Available Printer Ports] list, select [LPR Port], and then click [New Port...].8 Enter the IP address of the machine in the "Address" box, enter "Print" in the "Queue Name" box, andthen click [OK].% You must discriminate between upper and lower case letters when entering it.9 Select the created port, and then click [Next >].10 Click [Have Disk...].11 Click [Browse...].12 Select a desired printer driver folder in the DVD-ROM, and then click [Open].% Select a folder according to the printer driver, operating system, and language to be used. Selecta-ble printer drivers:PCL driver and fax driver13 Click [OK].The [Printer:] list appears.Items to be configured DescriptionIP address In [TCP/IP Settings] of the machine, specify the IP address.LPD Setting To use LPR printing:In [LPD Setting] for the machine, enable LPD printing.
