VL3622c/VL2822c/VL2222c 5-55.1 Mac OS X 10.2/10.3/10.4/10.5 5Configuring the AppleTalk settingsConfiguring the [AppleTalk Settings] for the machineEnable AppleTalk in [AppleTalk Settings], and then enter the printer name.d ReferenceFor details on the [AppleTalk Settings] for the machine, refer to the [User's Guide Network Administrator].Configuring the [AppleTalk Settings] for the computerConfigure the AppleTalk settings for the Macintosh computer connected to the printer.1 In the [Apple Menu], select [System Preferences...].2 Click the [Network] icon.3 The Ethernet setting window appears.% For OS X 10.5, select [Ethernet], and then click [Advanced...].% For OS X 10.4, select [Built-in Ethernet], and then click [Configure...].4 Double-click the [AppleTalk] tab to enable AppleTalk.5 Click the close button at the top left corner of the window.% When the [This service has unsaved changes] message appears, click [Apply].Adding a printer1 In the [Apple Menu], select [System Preferences...].2 Click the [Print & Fax] icon.3 Click [+] on the [Print & Fax] window.4 Click [Default].Connected printers are detected.% If no printer is detected, turn this machine off, then on again.In this case, turn off this machine, and then wait approximately 10 seconds before turning it onagain. If you turn the printer on immediately after turning it off, it may not function correctly.5 From the [Printer Name] list, select the desired AppleTalk-connected model name.The printer driver corresponding to the selected printer name is automatically selected.% After the printer driver is selected, go to Step 7.% If an incorrect printer driver is selected, go to Step 6.6 Select the desired printer driver manually.% When OS X 10.5 is used, select the [Select a driver to use...] from the [Print Using:], and then selectthe printer driver of the desired model name from the list.% When OS X 10.4 is used, select [GENERIC] from the [Print Using:], and then select the printer driverof the desired model name from the list.7 Click [Add].When the selected printer is registered in the [Print & Fax], the setting procedure is completed.% If the [Installable Options] window appears, proceed to change the option settings as necessary.For details, refer to page 9-5.Reference- For OS X 10.4, you can also add a printer by clicking [Add] in the [Printer Setup Utility] window.
