Mac OS X 10.2/10.3/10.4/10.555-6 VL3622c/VL2822c/VL2222c5.1Configuring the LPR settings[TCP/IP Settings] for the machineSpecify the IP address for the machine.[LPD Setting] for the printerBefore using LPR printing, enable LPD printing in [LPD Setting] for the machine.d ReferenceFor details on specifying the IP address for the machine, refer to the [User's Guide Network Administrator].For details on the [LPD Setting] for the machine, refer to the [User's Guide Network Administrator].Configuring the TCP/IP settings for the computerConfigure the TCP/IP settings for the Macintosh computer connected to the printer.1 In the [Apple Menu], select [System Preferences...].2 Click the [Network] icon.3 The Ethernet setting window appears.% For OS X 10.5, select [Ethernet], and then click [Advanced...].% For OS X 10.4, select [Built-in Ethernet], and then click [Configure...].4 Click the [TCP/IP] tab.5 Configure the settings including the IP address and subnet mask according to the settings of the net-work to which the Macintosh computer is connected.6 Click the close button at the top left corner of the window.% When the [This service has unsaved changes] message appears, click [Apply].Adding a printer1 In the [Apple Menu], select [System Preferences...].2 Click the [Print & Fax] icon.3 Click [+] on the [Print & Fax] window.4 Click [IP] or [IP Printer].5 In [Protocol:], select [Line Printer Daemon - LPD].6 In [Address:], enter the IP address for the machine.The printer driver corresponding to this machine being identified with its IP address is automatically se-lected.% After the printer driver is selected, go to Step 8.% If an incorrect printer driver is selected, go to Step 7.7 Select the desired printer driver manually.% When OS X 10.5 is used, select the [Select a driver to use...] from the [Print Using:], and then selectthe printer driver of the desired model name from the list.% When OS X 10.4 is used, select [GENERIC] from the [Print Using:], and then select the printer driverof the desired model name from the list.8 Click [Add].When the selected printer is registered in the [Print & Fax], the setting procedure is completed.% If the [Installable Options] window appears, proceed to change the option settings as necessary.For details, refer to page 9-5.
