VL6522c/VL5522c/VL4522c 4-74.3 Configuring settings to enable use of the Web browser 44.3.2 Restricting the use of Web browser for each userIf user management is performed in the MFP, you can restrict use of the Web browser for each user.[Function Permission]1 Press Utility/Counter to display [Utility].2 Press [Administrator Settings].3 Enter the administrator password, and then press [OK].4 Press [User Authentication/ Account Track].5 In [User Authentication Settings], press [User Registration].6 Select the user you want to restrict use of the Web browser, and press [Edit].% If you want to restrict public users to use the Web browser, press [ ] and select [Public].7 Press [Function Permission].8 In [Function Permission] (3/3), specify [Web Browser] to [Restrict], and press [OK].Reference- This setting is not available if [Invalid] is specified in [Administrator Settings]ö[Network Set-tings]ö[Web Browser Setting].- Configuring the function permission of the public user is available when public user access is allowedin [Administrator Settings]ö[User Authentication/ Account Track]ö[General Settings]ö[Public UserAccess].- If users are managed in the external server, you can configure the default settings for function permis-sions to users who log in to the MFP using external server authentication for the first time. To configureit, select [Administrator Settings]ö[User Authentication/ Account Track]ö[User Authentication Set-tings]ö[Administrative Settings]ö[Default Function Permission]ö[Web Browser]. For details on [De-fault Function Permission], refer to the [User's Guide Network Administrator].
