Setting up the PCL driver 5cm3521 5-7Selecting the paper sourceWhen changing the paper type, you can register it to an input tray and youwill be able to select the input tray according to the desired paper type.1 Click the Setup tab.2 From the “Paper Source” drop-down list, select the paper tray thatcontains the paper to be used.Setting the paper source of the paper typeFollow the procedure described below to assign a paper type to a paper tray.1 Click the [Paper Type Settings] button.2 Select the “Paper Source” being changed, and then click the [Edit Pa-per Type] button.3 Select the desired setting from the “Paper Type” drop-down list, andthen click the [OK] button.Only the paper types that can be selected in each input tray are dis-played.
