10 Various settings10-28 cm3521I/F TimeoutYou can set the time until a communication timeout occurs for the parallel,USB, or network interface. (Default setting: 60 seconds)1 On the Administrator Setting screen, touch [7 Printer Setting].– For details on displaying the Administrator Setting screen, refer to“To display the Administrator Setting screen” on page 10-23.2 On the Printer Setting screen, touch [1 I/F Timeout].The I/F Timeout screen appears.3 Touch [Edit] below the setting that you are specifying.4 Press the [C] (clear) key to erase the value, and then use the keypad totype in the default length of time (between 10 and 1000 seconds).– If a value outside of the allowable range is specified, the message“Input Error” appears. Type in a value within the allowable range.5 Touch [OK].The time until a communication timeout occurs is set.To cancel changes to the settings, touch [Cancel].
