3 Setting up network printing3-8 cm45213.4 SMB printingYou can use SMB printing (Windows printing) to print directly over the Micro-soft network from computers running Windows.Operations on this machineSet the IP address for this machine. For the setting procedure, refer to “Set-ting the IP address for this machine” on page 3-4.Next, specify the SMB print settings for this machine as described below.2 NoteThe settings can also be specified from Web Connection.1 Press the [Utility/Counter] key in this machine’s control panel, touch[Administrator Settings], and then enter the administrator password.– The administrator password is required to enter Administratormode. Ask the administrator of this machine for the administratorpassword.2 Touch [Network Settings], [SMB Settings], then [Print Settings].3 Touch [ON].4 Specify settings for the following. After specifying the settings, touch[OK].– NetBIOS Name: Specify the NetBIOS name (up to 15 characters).– Print Service Name: Specify the printing service name (up to 12characters).– Workgroup: Specify the work group name (up to 15 characters).
