3 Setting up network printing3-30 cm452111 Use the NetWare server console to display the print server screen, andthen check that created printer is shown as “Waiting for Job” for theconnected printer (0).2 ReminderWhen turning the power off, then on again, wait at least 10 seconds be-fore turning the power on again; otherwise, this machine may not functionproperly.For NetWare 4.x/5.x/6 Print Server mode (NDS)2 NoteTo use the Print Server mode, the IPX protocol must be loaded on theNetWare server.1 Log on to NetWare as an administrator from a client computer.2 Start up NWadmin.3 Select either the organization or organizational unit container that of-fers the print service, and then click “Print Services Quick Setup (non-NDPS)” on the “Tools” menu.4 Enter the appropriate names in the “Printer Server Name”, “PrinterName”, “Print Queue Name”, and “Print Queue Volume” fields, select“Other/Unknown” from the “Printer Type” field, and then click the [Cre-ate] button.!DetailFor queue user privileges, printer notification options, assignment of mul-tiple queues, and passwords, refer to the NetWare documentation, andspecify the settings as necessary.Next, specify the NetWare settings for this machine as described below.2 NoteThe settings can also be specified from Web Connection.
