Oce im4512 Operation Manual

Also see for im3512: Programming Date & Time Facsimile operation manual Settings guide Operation manual Operation manual

Contents

Oce im4512 Operation Manual Manual pdf 32 page image

2-15SCANNING SETTINGS (ORIGINAL SIZE,EXPOSURE, RESOLUTION AND FILE FORMAT)When sending an image, you can adjust the original size, exposure, resolution, and file format settings as needed.MANUALLY SETTING THE SCANNING SIZEIf you load an original that is not a standard size (such as an AB size), or if you wish to change the scanning size,touch the [ORIGINAL] key and set the original size manually.Perform the following steps after loading the document in the automatic document feeder or on the document glass.1 Touch the [ORIGINAL] key.2 Touch the [SCAN SIZE] key.The sizes that can beselected are displayed.3 Touch the desired original size key.[AUTO] is no longerhighlighted. [MANUAL]and the original size keyyou touched arehighlighted.If you wish to select an AB size, touch the[AB] key and then touch the desiredoriginal size key.[AB] is highlighted andAB size keys aredisplayed.To return to the inchpalette, touch the [INCH]key once again.If you wish to select a custom size, touchthe [SIZE INPUT] key and enter the size ofthe originalTouch the [X] key anduse the or keysto set the length in the Xdirection, and then touchthe [Y] key and do thesame for the Y direction.The length can be withinthe range 2-1/2" to 17"(64 to 432 mm) in the X direction and 2-1/2" to 11-5/8" (64 to 297 mm) in the Y direction, set inincrements of 1/8" (1 mm).When using the automatic documentfeeder, a setting for originals longer than17" (432 mm) (31-1/2" (800 mm) at themaximum) is available. In this case, touchthe [LONG SIZE] key.NOTEStandard sizes that can be detected are as follows:11"x17", 8-1/2"x14", 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2" (A3, B4, A4, A4R, B5, B5R, A5)If a non-standard size original is loaded (including special sizes), the closest standard size may be displayed, orthe original size may not appear at all.NOTEIf you wish to rotate the original 90° when creating animage file, touch the "ROTATE THE IMAGE 90DEGREES" checkbox (a checkmark should appearin the box). (only in the SCAN mode)ORIGINAL300x300dpiRESOLUTIONPDF MMR(G4)FILE FORMATAUTO 8½X11AUTO 8½X11 100% AUTO2-SIDEDBOOKLET 2-SIDEDTABLETSCAN SIZE SEND SIZEOKINCHLONG SIZESTANDARD SIZE SIZE INPUTAB5 X88 X148 X1311X17218 X11R218 X11212121 215 X8 R21 21B4A3A4A4RB5RA5A5RB5OKINCHLONG SIZESTANDARD SIZE SIZE INPUTABMANUAL 17X11(2 1/2 17)inch(2 1/2 11 5/8)inchYAUTOSTANDARD SIZEMANUALCUSTOMSIZE SIZE INPUTOKINCHLONG SIZESTANDARD SIZE SIZE INPUTAB5 X88 X148 X1311X17218 X11R218 X11212121 215 X8 R21 21