282 9.BLINKING GRAPHIC SYMBOLS5.Jam Symbols (Cont.)95 Close the transport guide and the fuser unit cover. Push up the fuserpressure release lever to return the jam releasing cover, the automaticduplexer and the bypass tray to the original positions.Releasing a paper misfeed in the Offset Tray Unit or Job Separator Unit(optional)DO NOT touch the fuser unit and the metal area around it. Since they are very hot, you could be burned orthe shock could cause an injury to your hand in the equipment.4 Remove any misfed paper inside thefuser unit.1 Make sure that the bypass tray, the auto-matic duplexer and the jam releasingcover are open, and push down the 2fuser pressure release levers until theycome to a stop.Be sure to perform step 1 without fail.2 Open the fuser unit cover.• Remove the misfed paper from the fuser unit side if it is easier.
