34 1.BEFORE USING EQUIPMENT2.Turning Power On / Off (Cont.)1 User managementIn the user management function, the users of the equipment can be limited or the past record of eachuser can be managed. When the equipment is managed under this function, turn the power of the equip-ment ON and enter the information required (e.g. user name, password) to use the equipment. The menufor entering user information also appears when you pressed the [ACCESS] button on the control panel orautomatic function clear has worked. Enter the information following the procedure below.1 The menu for user authentication appears.MFP local authentication, LDAP authenticationWindows Domain Authentication• The domain name previously set by the network administrator is displayed in [DOMAIN].
