Officine Gullo OGG 304FCU Instructions For Installation And Use Manual
Also see for 2OGG 304FCU: Installation instructions
                                                    | |
Contents
| 
EN3526 - Gas Cooktop Burner OperationGas Control Knob SettingElectric gas ignitionThe gas burner use an electric ignition device located neareach burner that ensures burner ignition.ELECTRIC IGNITIONModels with automatic re-ignitionThe electronic auto re-ignition, lights the surface burner whenthe corresponding control knob is turned at any valve rotationallows admits sufficient gas flow to support a flame.If any burner flame goes out due to a draft or other condition,the igniter automatically sparks on all burners to relight theflame.NOTE: this feature is provided as a convenience and is notintended as a safety feature.To set:• Push and turn a knob counter clockwise to any setting, allspark plugs will generate a clicking sound (spark), howeveronly the burner with the control knob adjusted to the HI-LOrange will produce a flame and reignite automatically if theflame goes out.WARNING• Do not operate a burner using empty cookware or withoutcookware on the grate.• Do not touch the burner when the igniters are clicking(sparking).• Do not let the burner flame extend beyond the edge ofthe pan.• Turn off all controls when not cooking.Failure to follow these instruction can result in personal injuryor fire.Gas burnersThe gas burners design of these cooktop models, allow apleasing option for cooking where size, power and simmeringare a primary concern.Burners with two flame ringsThis special burner has two separate flame rings to provide acomplete heat regulation from high power to simmering.To set :1. Push and turn the knob counter clockwise withing the mainHI - LO range, when the burner is turned on, the main flameand the Simmer flame will both ignite and remain on.2. Set desired temperature within the main HI - LO range.Simmer settingContinue turning the knob counter-clockwise to the ‘HI-LO SIMMER’ range. The outer flame ring will go out andtemperature adjustment can be made using the inner flamering only.Turning off the burnerTurn the knob clockwise as far as it will go to the off position.Ensure flame extinguishes fully.KNOB BURNER |
Related manuals for Officine Gullo 2OGG 304FCU
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine