MFP overview > 14CONTROL PANELREF. DESCRIPTION1. Key PadUsed to enter numbers, upper-case/lower-case letters and symbols in the Entry Line. Refer to“Character switching” on page 15 for further details.2. Left KeyWhen in Switching mode: Returns the display to the Function Selection screen or Scan Sub FunctionSelection screen from the Stand-by screen.When Setting up: Increments the value of the tree structure.3. Down KeyWhen setting up or in switching mode: Moves the cursor down.4. Right KeyWhen in Switching mode:> Used to confirm the Mode selected.> Used to start Push scan (if push scan is selected, the executing Push Scan screen is displayed.)When Setting up:> Decrements the value of the tree structure.5. Up KeyWhen setting up or in Switching mode: Moves the cursor up.6. Enter KeyWhen in Switching mode:> Used to confirm the Mode selected.> Used to start Push Scan (If Push scan is selected, the Executing Push scan screen is displayed.)When Setting up:> Decrements the value of the tree structure.> Increments the value of the tree structure as the set value is confirmed.When entering Pin ID:Used to confirm the PIN ID entered.Recovery from Error/Warning states.7. One Touch Key (MB470/MB480): Used to dial numbers from #00 to #09 that are registered asfax numbers.The shift key switches between a group of numbers from #00 to #04 and a group of numbers #05 to#09.1065 9874321
