Oki B2520 User Manual

Also see for B2520: User guide Quick start Brochure & specs Replacement instructions

Contents

B2520 / B2540- 19 -Contrast setupThe CONTRAST parameter allows to choose thephotocopy contrast. 845 - ADVANCED FCT/COPY/CONTRAST1 Setup the desired level of contrast with thebuttons and , confirm by pressing theOK button.2 You can also directly setup the desiredcontrast with the button, press severaltimes on this button until the desired setupwithout using the Menu 845.3 Quit this menu by pressing the button.Brightness setupThe BRIGHTNESS parameter allows to lighten ordarken your original document. 846 - ADVANCED FCT/COPY/LUMINOSITY1 Setup the desired brightness with thebuttons and .2 Confirm your choice by pressing the OKbutton.3 Quit this menu by pressing the button.Paper type setup 851 - ADVANCED FCT/SCAN. & PRINT/PAPERTYPE1 Select the paper NORMAL 13 to 20 lb. (60-90 g/m²) or THICK 24 TO 36 LB. (90-162 g/m²) that you use with the buttons and .2 Confirm your setup by pressing the OKbutton.3 Quit this menu by pressing the button.Paper tray selectionThe Automatic selection can have two meaningsdepending on the paper format defined on thepaper trays. The following table describes thedifferent cases. 852 - ADVANCED FCT/SCAN. & PRINT/TRAYPAPER1 Select the default paper tray to use,AUTOMATIC or MANUAL, with the buttons and .2 Confirm by pressing the OK button.3 Quit this menu by pressing the button.Sheet-feed analysis margins setupIf you want to, you can offset the lateral marginsof the document to the left or right during theanalysis with your sheet-feed scanner. 853 - ADVANCED FCT/SCAN. & PRINT/ S.F.MARGINS1 Setup the left / right margins offsets (by 0.5mm steps) with the buttons and .2 Confirm by pressing the OK button.3 Quit this menu by pressing the button.Analysis margins setupIf you want to, you can offset the lateral marginsof the document to the left or right during theanalysis with your flat-bed scanner. 854 - ADVANCED FCT/SCAN. & PRINT/FLATBED MARG1 Setup the left / right margins offsets (by0.5 mm steps) with the buttons and .2 Confirm by pressing the OK button.3 Quit this menu by pressing the button.Default tray Tray used for copySAME PAPERFORMAT INTHE TRAYSAUTOMATICSelection betweenthe main tray and themanual tray.MANUAL The manual tray isused.DIFFERENTPAPER FOR-MAT IN THETRAYSAUTOMATIC The main tray is usedMANUAL The manual tray isused.