Oki B2520 User Manual

Also see for B2520: User guide Quick start Brochure & specs Replacement instructions

Contents

B2520 / B2540- 31 -Received faxes reduction modeThis menu allows you to reduce received faxes forprinting. This adjustment can be automatic ormanual.Automatic mode:This mode automatically resizes received faxes.To set automatic mode:246 - SETUP / RECEPTION / REDUCTION1 Select Automatic and confirm with OK.2 To exit this menu, press .Manual mode:The machine proposes a 70 to 100 % reduction.Outside these values, the machine beeps for error.This fixed reduction will be used when printingreceived documents, regardless of the used paperformat.To set the manual mode:246 - SETUP / RECEPTION / REDUCTION1 Select FIXED and confirm with OK.2 Enter the reduction value (between 70 and100) and confirm with OK.3 To exit this menu, press .Technical ParametersAs delivered your machine is preset by default.However, you may adjust it to meet yourrequirements by resetting the technicalparameters.To set the technical parameters:29 - SETUP / TECHNICALS1 Select the desired parameter and confirmwith OK.2 With the keys or, modify the parametersettings by following the table below andpress OK.Parameter Signification1 - ScanningmodeDefault value of the scan moderesolution for the documentsto be transmitted.2 - TX header If this parameter is on, yourheader will appear on alldocuments sent to yoursubscribers with your name,number, date and number ofpages.Note: U. S. regulations requirethat every fax include the date,time it is sent, and the nameand fax number of the sender.3 - TX speed Transmission speed foroutgoing documents.For a quality telephone line(compatible, no echo),communications occur atmaximum speed.However, it may be necessaryto restrict the transmissionspeed for some calls.4 - Echo protect If this parameter is on, the on-line echo will be reducedduring long distance calls.6 - EPT mode For some long distance calls(satellite), the on-line echomay disturb the call.7 - COM. display Choice between transmissionspeed displayed or number ofthe page in progress.8 - Eco energy(ECO)Choosing the printer standbydelay: the printer will switch tostandby after a delay (inminutes) of NON-operation orduring the period of time ofyour choice.10 - RX header If this parameter is on, alldocuments received by yourfax will include the subscriber’sheader with his name, number(if available) fax print date andthe page number.11 - RX speed Transmission speed forincoming documents.For a quality telephone line(compatible, no echo),communications occur atmaximum speed.However, it may be necessaryto restrict the transmissionspeed for some calls.