OPERATOR PANELS > 22information about the B4300, B4300n, B4300nPS printers. Note,however, that the RS232 Menu and Network Menu are not relevant tothe B4200 printer.CHANGING THE DISPLAY LANGUAGECarry out the following instructions to change the language that isdisplayed in the Status Monitor.1. Start the Status Monitor.2. Select the Printer Setup tab.3. On the Maintenance 2 tab, select the required language in the[Language] dropdown menu.4. Click on [OK].PRINTING MENU SETTINGSThe menu settings can be printed as a menu map as follows.Using the control button1. Press the control button to take the printer off-line.2. Press and hold down the control button for at least twoseconds, but less than five seconds.3. The printer prints a list of the menu settings and a demo printpage.NOTEDemo and menu pages can also be printed using the printer StatusMonitor.
