Oki B4200 User Manual
Also see for B4300n: Configuration guideUser manualInstructionsInstallation instructionsSetup guide
                                                                                         | |
Contents
| 
PAPER RECOMMENDATIONS > 40PAPER FEED, SIZE AND MEDIA SETTINGThe process used to fuse (fix) the printed image to the paper involvesa mixture of pressure and heat. Too much heat will cause lightweightpaper to crease or curl and corrugations in transparencies. Too littleheat will cause the image not to fuse fully into heavyweight paper.B4200The print quality for different types of paper is adjusted by changingthe media type as follows:1. Start the Status MonitorStatus MonitorStatus MonitorStatus Monitor.2. Click on [Printer Setup] tab - [Printer Menu] button - [Paper]tab. Click on the button for the paper tray being used. Adjustthe media type to the required setting and, if necessary, thepaper size to the size of the paper being used.3. Click on the [Apply] button, [Close] button then [OK] button toset the printer to the new media type and printing quality.Printing transparenciesWhen printing transparencies, the manual feed must be used and themedia type changed to transparencies as follows :1. Open the manual feed on the printer and place thetransparency face up between the paper guides.2. Adjust the paper guides to the width of the transparency.NOTEAlthough media properties can be set in the printer driver for particularjobs, when filling a tray with media it is recommended that you manuallyset the printer to match the media as described here.CAUTION!Damage to the printer may occur if the incorrect setting is used whenprinting transparencies. |
Related manuals for Oki B4300n
manualsdatabase
Your AI-powered manual search engine