Oki B4300 User Manual
Also see for B4300n: Configuration guideUser manualInstructionsInstallation instructionsSetup guide
                                                                                                                        | |
Contents
| 
UNIX 102AIX 4.1.5 configurationThe following explanation uses AIX4.1.5 and an OKI printer as examples.The absolute path of commands and the method of configuring may differwith the OS version. Refer to the workstation’s manual. If an incorrect IPaddress is entered, the network may go down or other damage may occur.Configure after consulting the network manager.1. Log in as [root]. If you do not have superuser rights, the networkmanager should conduct the configuration.2. Register the IP address and the host name in the /etc/hosts file.Example: for IP Address 192.168.29.127 and host name okiprinter192.168.20.127 PRINTER3. Use the ping command to confirm connection with the networkcard.Example: for host name okiprinter# ping PRINTERIf there is no reply, there is a problem with the configuration of the IPaddress (the IP address has been already set manually or DHCP/RARPserver may run), or with the network. Reset the network interface cardsettings to default and try to set a temporary IP address. If you still havethe problem after resetting the network interface card, consult the networkmanager.4. Register the host that was previously registered as the print server.Example: for the OKI printer registered as the print servera. Add the print server.# ruser –a –p okiprinterb. Activate the remote printer daemon. |
Related manuals for Oki B4300n
manualsdatabase
Your AI-powered manual search engine