Oki B4300 User Manual
Also see for B4300n: Configuration guideUser manualInstructionsInstallation instructionsSetup guide
                                                                                                                        | |
Contents
| 
UNIX 91UNIXOverviewThe OkiLAN print server supports many protocols such as LPD, FTP,TELNET, SNMP and IPP, and works within the UNIX environment.To use the network card within the UNIX environment, the followingsteps are required:ConfigurationNetwork Interface card settingThe first step in installing the network card under UNIX is to set up the IPaddress, Subnet Mask and Gateway. This section explains one way to setthem up from a UNIX workstation.> The network addresses used in this manual are shown as examplesonly. Network addresses used in your installation must be generatedfor your own network.> Log in as [root] to change the configuration of the Print Server. Bydefault, there is no root password.> If an incorrect IP address, Subnet Mask or Gateway is entered, thenetwork may go down or other damage may occur. Check theaddress with your network manager.The following explanation uses Sun Solaris 2.8 (Solaris 8) as an example.The actual commands may differ between versions of UNIX, so refer tothe workstation manuals for more information.1. Log in as root to the workstation> If you do not have superuser rights, the network manger shouldconduct the configuration.2. If the print server does not have an IP addresses already assigned,use the arp command to set a temporary IP address.Example: for IP address 192.68.20.127 and network card address00:80:92:01:00:D2 |
Related manuals for Oki B4300n
manualsdatabase
Your AI-powered manual search engine